CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger
CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger

CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger

50002

Regular price $119.95
/
Shipping calculated at checkout.
475 in stock

Cybercharger Wireless Phone Holder

The Ciro Cybercharger® is the evolution of our top rated phone holder. We've gone back to the drawing board to completely redesign, improve, and integrate 15 watt wireless fast charging into the holder. Compatible with all the latest smartphones, in all sizes, the Cybercharger will hold your phone securely while never leaving you without a charge!

*Also works great with our Aluminum Bar Mount Clamp in sizes 7/8" & 1" or 1-1/4"

Features
  • Supports up to 15W wireless charging
  • IOS and Android support
  • Fast charge capable
  • Waterproof electronics 
  • Strong reinforced black nylon components with soft touch high-grip fingers
  • Easy one-handed operations
  • Securely grips almost any phone including the case 
  • Adjustable from 2-3/8” wide to 4” wide
  • Compatible with all Ciro ball mounts
  • Rotates 360 degrees allowing portrait or landscape display
  • Simple wire harness included, connects directly to any 12v battery with included in-line fuse
  • Locking handle can be used on either side of holder
  • Adjustable gripping force
  • Adjustable bottom foot to accommodate a variety of phone heights 
  • Compatible with Qi-enabled cellphone devices
  • If you already have the Ciro Premium Phone holder on your bike you can reuse your Ciro wiring harness. 
  • Offered in 3 configurations:
    • Cybercharger only (no mounting kit included) -50002
    • Cybercharger with black perch mount -52311
    • Cybercharger with chrome perch mount -52310
  • Please confirm with your phone manufacture that your model phone has wireless charging capabilities prior to ordering
    • Patent Pending
    • Drag Specialties part numbers:
      • 0636-0177 (50002)
      • 0636-0179 (52311)
      • 0636-0178 (52310)
    Fitment
    • For use with Ciro ball mounting system
    • Connects to any 12 volt power source
    • Phone holder is designed to work with a wide variety of cases, be sure to confirm that your case is compatible with wireless charging technology to utilize the charging features of this holder
    • If you already have the Ciro Premium Phone holder on your bike you can reuse your Ciro wiring harness. 
    • Please confirm with your phone manufacturer that your model phone has wireless charging capabilities prior to ordering
    • The fitment is only limited by your imagination. Need help with fitment to a model not listed? Give us a call and we'll help you out, 715-808-0027 or email us at SALES@CIRO3D.CO
    2.0 Wireless charging phone compatibility 
    Not all phones on this list have been tested by Ciro.  
    Capabilities may vary by countries
    Please refer to the manufacture of your phone for its capabilities of wireless charging
    • Apple
      • iPhone 8
      • iPhone 8 Plus
      • iPhone X
      • iPhone Xs
      • iPhone Xs Max
      • iPhone Xr
      • iPhone 11
      • iPhone 11 Pro
      • iPhone 11 Pro Max
      • iPhone SE (2020)
      • iPhone 12 Mini 
      • iPhone 12 
      • iPhone 12 Pro 
      • iPhone 12 Pro Max
    • Blackberry
      • Priv
      • Passport
      • Z30
    • Google
      • Nexus 4
      • Nexus 5
      • Nexus 6
      • Pixal 5
      • Pixal 4 XL
      • Pixal 4
      • Pixal 3 XL
      • Pixal 3
    • Kyocera
      • Brigadier
      • DuraForce
      • Hydro Elite
      • Torque G02
      • Torque KC-S701
      • Urbano L01
      • Urbano L03
      • E6910
    • LG
      • G8 ThinQ
      • G8s ThnkQ
      • G7 ThinQ
      • V30
      • G6 (US Version)
      • G4 (optional)
      • G3 (optional)
      • G2
      • G3
      • Lucid 2
      • Lucid 3
      • Optimus F5
      • Optimus G Pro
      • Optimus It L-05E
      • Spectrum 2
      • Vu 2
      • Vu 3
      • V30
      • V30 Plus
      • V40 ThinQ
      • V50 ThinQ
      • V60 ThinQ
    • Microsoft
      • Lumia 950
      • Lumia 950 Dual Sim
      • Lumia 950 XL
      • Lumia 950 XL Dual Sim
    • Motorola
      • Droid Maxx
      • Droid Mini
      • Droid Turbo
      • Droid Turbo 2
      • Moto Maxx
      • Moto X Force
      • Edge+
    • Nokia
      • Lumia 1520
      • Lumia 735
      • Lumia 830
      • Lumia 920
      • Lumia 928
      • Lumia 929 (Icon)
      • Lumia 930
      • 8 Sirocco
      • 9 PureView
    • Samaung
      • Galaxy S6
      • Galaxy S6 Active
      • Galaxy S6 Edge
      • Galaxy S6 Edge Plus
      • Galaxy S7
      • Galaxy S7 Active
      • Galaxy S7 Edge
      • Galaxy S8
      • Galaxy S8 Active
      • Galaxy S8 Plus
      • Galaxy Note 8
      • Galaxy S9
      • Galaxy S9 Plus
      • Galaxy Note 9
      • Galaxy S10
      • Galaxy S10e
      • Galaxy S10 Plus
      • Galaxy Note 10
      • Galaxy Note 10 Plus
      • Galaxy Fold
      • Galaxy S20
      • Galaxy S20+
      • Galaxy S20 Ultra (5G)
      • Galaxy Z Flip
      • Leader 8
      • W2016
    • Sony
      • Xperia Z3V
      • Xperia Z4V
      • Xperia XZ2
      • Xperia XZ2 Premium
      • Xperia XZ3
        Video

        Instructions

        Click Here for Instructions

        My phone will not charge troubleshooting:

        1. Confirm you have power going to the plug that plugs in to the Cybercharger. 
        2. Remove your phone case. Some cases are too thick to keep on your phone while you charge it wirelessly. If wireless charging is not working on your phone, try taking the phone out of its case before placing it on the charging pad.
        3. Make sure your phone is QI-enabled. Please check with your phones manufacture if your phone is capable of wireless charging.  
        4. Adjust the lower support foot. The Cybercharger lower foot is adjustable to allow you to align the the phone charging coil to Cybercharger coil. To adjust the foot just loosen the bottom center screw on the back a couple turns and the foot will pull out about 5/8". Our charging coils are located right behind the word "Ciro" on the Cybercharger and the phones coils will vary by make and model. We have found most iPhones work with the foot all the way in and other models with the foot pulled out a little. 
        5. Disconnect wired headphones or charging cables. If headphones are connected to your phone, it could block the phone from charging.
        6. Restart your phone. Restarting your phone can sometimes fix minor software issues and glitches which could be preventing it from charging wirelessly. Please check with your phones manufacture on how to do this. 
        7. If the phone has been exposed to the sun for a long period of time the phone may go into thermal overload to protect itself. Once this happens the phone will start shutting off services until the phone has cooled down. Once the phone has cooled down to normal operating temperature place back into the Cybercharger again. 
        8. Performa hard reset on your phone. If your phone is completely unresponsive when you place it in the wireless Cybercharger, you may need to perform a hard reset. A hard reset will force your phone to quickly turn off and back on, which can temporarily fix the problem if your phone is not charging wirelessly. Please check with your phones manufacture on how to do this. 
        9. Update your phone. On some phones wireless charging was originally implemented by a software update. If wireless charging is not working on your phone, you may just have to update your phone to enable its wireless charging functionality.
        10. If you continue to have issues please contact our technical support at 715-808-0027 ext 100. 
        FAQ

        Q: Will the ball mount work with our brand ball mount accessories?

        A:  All Ciro ball mount accessories used our compact 5/8" ball mounting system. You will need to confirm the ball size with the brand of mount your using.

        Q: I installed the Cybercharger on my motorcycle per the instructions and my phone will not charge, what should I do?

        A: First check with the manufacture of your phone and confirm that it supports wireless charging. If the phone does support wireless charging confirm that wireless charging is enabled. We have also found that some model phones will need to be rebooted then placed in the Cybercharger before they will accept wireless charging, this will only need to be done once. If you continue to have issues please contact our technical support at 715-808-0027 ext 100. 

        Q; I installed my Cybercharger and it charges like it should but now my biker will now start. 

        A: All wireless chargers generate a ping signal looking for your phone so it knows when to start charging. This signal frequency band can interfere with key fobs, passive start systems or radios within a 12 in radius of the charging base. Try moving your key fob to a different area or pocket. If you continue to have issues please contact our technical support at 715-808-0027 ext 100. 

         

        Customer Reviews

        Based on 21 reviews
        71%
        (15)
        19%
        (4)
        10%
        (2)
        0%
        (0)
        0%
        (0)
        A
        Anonymous

        wish the bolts were more heavy duty, broke one bolting it in

        B
        B.R.
        Instructions could be better

        Not being a “gear head” or wrench turner, it would have been nice to have more detailed instructions, perhaps even pictures which demonstrate the installation of the wiring.

        A
        A.B.

        Works great!! Easy install!! Fast shipping

        c
        c.F.

        CYBERCHARGER® Phone Holder with 15W Wireless Fast Charger

        J
        J.W.
        No other iphone holder can compare!

        I promise I did my due diligence before deciding on purchasing Cirps' iPhone holder. At almost $150, it had to beat the competition hands down and it does! I purchased the version with the wireless charger. Simple to install and very sturdy!. No need for rubber bands! The design and materials of this device cannot be found anywhere! Ciro3d got this one right! I still think it's a bit pricey but it does the job!