One or more of these XMC accessories maybe needed to install the Vision X headlights.

• 45010: Vision X LED H4 to Delphi 4 pin headlight Connector
• 2014-up Harley-Davidson models
• Electra Glide
• Street Glide
• Street Glide Special
• Ultra Limited*
• Ultra Classic*
• Electra Glide Standard
• Tri Glide Ultra models*
• On the above models equipped with factory dual beam headlights follow the headlight Y wire harness back to the Delphi flat 4 pin connector and remove the harness Y harness to install this harness. 
• *Models equipped with Factory Daymaker LED Headlight will also need the 45012 to have the low beam on while the high beam is on.  

________________________________________________________

• 45011: Vision X LED H4 / H11 to H9 Y-Adapter
• All following models with the factory dual beam headlight.
• 2014-up Road King 
• 2017-up Road King Special
• 2014-up  Freewheeler

• 45012: Dual Beam headlight wiring adapter. “High Four” All On Adapter is designed to accompany the Vision X headlight. The 45012 allows the high and low beams to shine at the same time.
• All models prior 2014 need the 45012 to have both high and low beam on when high beam switch is on. 
• Not needed on 2014-up Touring models with factory equipped standard Dual Beam Halogen headlight. 
• 2014-up Ultra models equipped with factory LED Daymaker headlight the 45012 will be needed to have the dual beam option.
• Will not fit in most Factory Harley-Davidson 5-3/4" headlight buckets. 

_______________________________________________________________

   Factory H4 Halogen Light 68342-05A

Factory LED Daymaker Headlight  67700249 or 67700066

Factory Dual Beam Headlight 67700065

________________________________________________________

• 45007: Required when installing 7” Vision X headlight (P/N 45000 or 45001) into 2014-up Indian® Chieftain® or Roadmaster® models.

Instructions

Click here for XMC installation instructions