Fang White Halo Front Signal Light Inserts With Chrome or Black Bezel
The Fang Front Signal Light Inserts are a great way to add modern styling and class to your bike while also increasing visibility. We've engineered the lens to amplify light output for maximum brightness as well as DOT compliance. The result is an eye-catching white LED halo driving light and super bright amber turn signal.
DOT approved high intensity amber turn signal for improved visibility
The visor has a unique modern design for great style that compliments any motorcycle
Optical grade polycarbonate lens has scientifically engineered optics for maximum light transfer and increased visibility
High intensity white running light provides a distinctive halo affect for increased visibility and style
Amber LED turn signal
Available black or chrome bezel
Fits 2000 and later H-D models with bullet turn signals
Everything you need for a plug-and-play install on '14-up H-D models
Some models prier to 2013 may require require a load equalizer to correct turn signal timing
Drag Specialties part number: 2040-2017 (45400) 2040-2019 (45420)
IMPORTANT NOTE FOR OUTSIDE THE USA:
Harley-Davidsons sold outside the United States sometimes have single circuit sockets. The Fang Turn Signal Inserts require a dual circuit socket to function. Please contact us before your order if you need assistance determining which socket you have.
Touring & Trike:
'14-up Harley-Davidson Touring motorcycles do not require a load equalizer.
'02-'13 Harley-Davidson Touring motorcycles may require a load equalizer to correct turn signal timing.
'04-'05 Screamin’ Eagle Electra Glide FLHTCSE
'06-'13 CVO Ultra Classic FLHTCUSE
'14-up Electra Glide Ultra Classic FLHTCU
'14-up Electra Glide Ultra Limited FLHTK
'14-'15 CVO Limited FLHTKSE
'04-'09 Road Glide FLTR/I
'10-'13 Road Glide Custom FLTRX
'15-up Road Glide, Road Glide Special FLTRX, FLTRXS
'11-'13 Road Glide Ultra FLTRU
'09 CVO Road Glide FLTRSE
'11, '15 CVO Road Glide Ultra FLTRUSE
'12-'13 CVO Road Glide Custom FLTRXSE
'04-'07 Road King Custom FLHRS/I
’17-up Road King Special FLHRXS
'02-'03 Screamin’ Eagle Road King FLHRSEI
'07-'08 & '13-'14 CVO Road King FLHRSE
'06-up Street Glide FLHX/I
'14-up Street Glide, Street Glide Special FLHX, FLHXS
'10-'12, '15 CVO Street Glide FLHXSE
'09-up Tri Glide Ultra Classic FLHTCUTG
'15-up Road Glide FLRT
'10-'11 Street Glide Trike FLHXXX
'11-up Harley-Davidson Softail motorcycles do not require a load equalizer.
'00-'10 Harley-Davidson Softail motorcycles may require a load equalizer to correct turn signal timing.
'12-'17 Softail Slim FLS
'16-'17 Softail Slim S FLSS
'05-'06 Screamin’ Eagle Fat Boy FLSTFSE
'06 Heritage Softail FLST/I
'05-'07 Softail Springer Classic FLSTSC/I
'02-'03 Springer Softail FLSTS/I
'10-'12 CVO Softail Convertible FLSTSE
'05-'17 Softail Deluxe FLSTN
'14-'15 CVO Softail Deluxe FLSTNSE
'08-'11 Cross Bones FLSTSB
'02-'17 Fat Boy FLSTF/I
'10-'16 Fat Boy Low FLSTFB
'16-'17 Fat Boy S FLSTFS/BS
'00-'07 Softail Deuce FXSTD/I
'03-'04 Screamin’ Eagle Softail Deuce FXSTDSE
'02-'08 Softail Standard FXST/I
'02-'09 Night Train FXSTB/I
'02-'06 Springer Softail FXSTS/I
'07-'10 Softail Custom FXSTC
'07-'09 CVO Softail Springer FXSTSSE
'08-'11 Rocker FXCW/C
'11-'13 Blackline FXS
'13-'17 Breakout FXSB
'13-'14 CVO Breakout FXSBSE (except '16-'17 FXSE)
2018 Softail - Milwaukee Eight:
’18 Sport Glide FLSB
’18 Low Rider FXLR
’18 Slim FLSL
’18 Street Bob FXBB
’18 Fat Bob FXFB/S
’18 Fat Boy FLFB/S
’18 Breakout FXBR/S
’18 Heritage Classic FLHC/S
'12-up Harley-Davidson Dyna motorcycles do not require a load equalizer
'01-'11 Harley-Davidson Dyna motorcycles may require a load equalizer to correct turn signal timing
'01 Super Glide T-Sport FXDX/T
'02-'17 Dyna Models
'14-up Harley-Davidson Sportster motorcycles do not require a load equalizer
'02-'13 Harley-Davidson Sportster motorcycles may require a load equalizer to correct turn signal timing
All '02-up XL Models
If your motorcycle requires a load equalizer we recommend:
-Namz/Badlands, Load Equalizers
IMPORTANT NOTE FOR OUTSIDE THE USA:
Harley-Davidsons sold outside the United States sometimes have single circuit sockets. The Fang® Turn Signal Inserts require a dual circuit socket to function.Please contact us before your order if you need assistance determining which socket you have.
XMC 7" LED Headlight From Vision X In Chrome or Black Chrome
The XMC Headlight was engineered to deliver optimal road coverage. With additional LEDs that fill in the space between the vehicle and the peak of the beam, the XMC Headlight makes riding a safer experience for everyone on the road. Halo ring is integrated and the light is backed by a lifetime warranty!
DOT Certified Driving Light Take your Vision X XMC LED Headlight anywhere without worrying. Every part of the headlight has been approved and certified by the DOT in all states.
These are not E-MARK or ADR certified for use in other countries.
Perfect For Any Bike The XMC 7″ LED Headlight is the perfect accessory for any bike with a 7″ round headlight housing. With outstanding performance, you’ll turn heads and shine brighter at the same time. Available in Polished Chrome or Black Chrome finishes, these LED Headlights are the perfect touch to personalize your bike.
Adds additional LEDs that fill in the space between the vehicle and the peak of the beam
Makes riding a safer experience for everyone on the road
High Beam, Low Beam, LED Halo Ring
Available in Black Chrome Finish
Wiring Adapter Plug NOT Included. SEE FITMENT SECTION FOR MORE DETAILS
DOT Approved Headlight
4,210 Raw Lumens
2,947 Effective Lumens
White LED color
VisionX Part # XMC-7RD
PAR 56 / H6017 / H6024 Direct Replacement
3 Modes (Low, High, Halo) >Universal Application
1996-up Harley-Davidson Touring models and other motorcycles with 7" headlight.
2014-up Harley-Davidson Electra Glide, Street Glide, Limited, Ultra, Ultra Classic & Tri-Glide models require part# 45010, XMC-H42DELPHI Delphi flat 4 to H4 adapter for installation if replacing the Stock Harley LED
2014-up Road King requires the 45011 H4-H9 Dual Beam Adapter
The Lighted License Plate Frame for Tri Glide® is a dramatic way to customize the rear of the Trike. This is a unique license plate mount with hidden fasteners and a sculpted shape. The plug-n-play LED lights add a run only function to help increase your visibility on the road. It’s handsome looks and bright lights will transforms the rear end of your Trike.
Red run LED lights
Seamlessly integrates with the license plate light
Make your fairing pop with the Ciro Bat Blades®! These innovative strips feature ultra bright white LEDs to work as daytime running lights and also amber turn signals on each side to be sure you are seen.
Easy installation with included wiring adapter plugs into OEM harness
Requires no drilling, cutting, or splicing
Low profile black circuit board blends in seamlessly when the bike is off
White lights fade when turn is on so the amber really stands out
Black or Chrome Fairing Vent Trim-Lighted in Chrome or Black
Ciro has designed the most appealing and innovative fairing vent trim in the market today. The LED lighted version features light pipe technology that create a mesmerizing effect. The vent trim will not affect the flow of the fairing vent.
Ciro® Lighted Vent Trim utilizes light pipe technology to create a one of a kind lighting effect on your 2014-up Batwing fairing vent
This piece will not affect the function of the OEM vent airflow
The LED light module plugs directly into the stock wiring harness with no cutting, drilling, or splicing necessary
Ciro also has a version of the fairing vent trim that is not lighted.
Ciro® Fender Blades® LED Lights are one of the cleanest ways to add a splash of light to the back of your bike. The low profile light housing sits right below the fender to blend seamlessly into the back of the bike for a stealthy look. Fender Blades™ lights feature super bright run, turn, and brake lights to be sure you are seen day or night.
Q: Will the Ciro Fender Blades work with light strobe kits?
A: No. Sorry due to how the electronics process the signals they start to work against each other.
Ciro Windshield Trim With or Without LED Lights in Chrome or Black
Pierce the night with the Ciro LED Lighted Horizon Windshield Trim. Clean and classy styling flows with the lines of your vented batwing fairing to enhance the look of the front of your motorcycle. Hidden LEDs illuminate the bottom edge with a bright white running light and amber sequential turn signals to increase visibility.
Bright white running light, amber sequential turn signals
Plug-n-play installation with no drilling
LEDs are hidden when bike is off for an ultra clean look
Eliminates factory gap between fairing and windshield
Q: I installed the Lighted Windshield Trim and the lights are not working correctly, they are dim or flickering, did I get a bad part?
A: No. This will happens when the lights are plugged into the incorrect connectors that are located under the radio. The correct connectors are located under the light bar on the side of the forks. Refer to step 3 on the instructions for more information.
Shock & Awe 2.0 LED Engine Starter Kit
Shock & Awe 2.0 takes your L.E.D. lighting kit to the next level. We've packed the app full of exciting features such as a racing mode to track your speed, music and microphone integration, 3 channel output, brake function, and more! With the Ciro® Bluetooth app you are able to choose from millions of colors to find the perfect match for your bike or any other vehicle you choose to accessorize.
Bluetooth controller is compatible with all Ciro Shock & Awe® L.E.D.s (Including Shock & Awe 1.0)
Add some fangs to the front of your bike with the Ciro Headlight Bezel. This new design is sculpted to perfectly fill the space around your headlight for a streamlined look. This bezel also features custom fang shaped bright white running lights to really make your bike stand apart from the rest.
Easy installation includes everything you need to mount and plug into your accessory port with no cutting, drilling, or splicing
Custom light housing gives you a unique new look
Bright white LEDs automatically turn on and off with your headlight
Available in chrome or black
Removable light housing makes painting to color match easy
Tour Blade® LED Lights for Harley-Davidson Tour-Pak
The Ciro Tour Blade® LED light is the cleanest way to add more light to the back of your bike. The low profile light strip fits between your backrest and tour pack to blend right into the motorcycle, while at the same time adding bright sequential turn signals, running lights, and center brake light.
Controller is needed if you are not running any other Ciro products that are using the 40019 controller.
Note: Ciro's can-bus friendly lighting controller works with Bag Blades®, Tour Blade®, Snakeyes and Filler Panel Lights for 2014-up bikes. Only one controller is needed to run all four products. If you do not have the Ciro controller already, purchase Tour Blade® with controller. If you have any questions please email us or give us a call at 715-808-0027.
Low profile light strip is hidden under your backrest for a super clean look
Installation is easy and requires no cutting, drilling, or wire tapping, with the Ciro plug-and-play lighting controller
Features run, sequential turn, and center brake light
Amber turn signal really draws drivers’ eyes to be sure you’re seen
Snakeyes LED Lights for Harley-Davidson Tour-Pak in Black or Chrome
Smooth the transition between back rest and Tour-Pak with the Ciro Snakeyes. This set includes custom light housing featuring bright red run and brake lights as well as an amber turn signal to really stand out. This kit uses the proprietary Ciro lighting controller to make for an easy plug and play installation.
Note: Ciro's can-bus friendly lighting controller works with Bag Blades, Tour Blade, Snakeyes and Filler Panel Lights for 2014-up bikes. Only one controller is needed to run all four products. If you do not have the Ciro controller already, purchase the Snakeyes with controller. If you have any questions please email us or give us a call at 715-808-0027.
Plug and play installation
Increases visibility from the rear
Adds styling to your Tour-Pak
Run, turn, and brake function
Available in chrome or black
Available with or without the Ciro controller
Easily removable light housings makes painting to color match easy
XMC LED Passing Lamps From Vision X in Chrome or Black Chrome
The XMC 4.5″ LED Passing Lamp Halo Series from Vision X features an immensely bright LED Halo around the outer edge of the Reflector. With a separate wire, you’ll be able to rig the Halo up as a daytime running light, additional indicator lighting, or anything else you can imagine.
Passing Lamp Vision X Lighting’s XMC 4.5″ Passing Light Gain extra visibility and enhance your safety on the road with the addition of a set of 4.5″ XMC 10-Watt LED Passing Lamps. These powerful lights each pack five times more output than the stock passing lamps, and draw six times less amperage. Dramatically improve your performance while increasing visibility and safety. The MSR Style Reflectors give the XMC Passing Lights a powerful beam pattern than combines distance with full spread coverage. Includes lifetime warranty!
These lights put out a wide, flat light to greatly help visibility
Available in chrome or black chrome
Plug in installation
Built in halos
Each Lamp Head Is Five Times Brighter Than Stock Halogen Bulb
Six Time Less Amperage Than Stock Halogen Bulbs
Submersible Up To 1 Meter (IP67)
Raw lumens 4210 lm
Effective lumens 2947 lm
White LED Color
Sold as pair
DOT Approved Headlight Fixture
These are not E-MARK or ADR certified for use in other countries.
Fits most bikes with 4-1/2" passing lamps including 2005-up Harley-Davidson
Ciro Can-Bus Controller
The Ciro proprietary can-bus controller is used for Ciro lighting products (with red and amber LEDs) on 2014-up Harley-Davidson Touring models. This controller is necessary if you have not installed any Ciro lights on your bike previously and plan to install any of the following: Ciro Snakeyes, Ciro Tour Blade®, Ciro Bag Blades. The parts listed above are sold in a kit option with the Ciro proprietary can-bus controller, but if you did not originally purchase the necessary kit for your bike, this is what you'll need!
Easy plug-and-play installation
Designed and engineered to work with the Can-bus electrical system on 2014-up Harley-Davidson touring models.
Will not trip engine trouble codes.
Allows for greater visibility by creating an amber turn signal circuit to be used in Ciro's Bag Blades, Tour Blade, Snakeyes and Filler Panel Lights
Unique 3 channel function allows there to be separate zones. Upgrade your Shock & Awe 1.0 to have the new speed function, music mode, and brake mode with this controller. Bluetooth controller is compatible with all Ciro Shock & Awe 2.0 (Including Shock & Awe 1.0)
Bluetooth controller is compatible with all Ciro Shock & Awe 2.0 (Including Shock & Awe 1.0)