Phone Holders

The new Ciro Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers.

With the Premium model never worry about draining your phone battery while riding again! The Ciro Smartphone Holder has a built in 1.3 amp USB plug-in (cable not included) so you’ll be able to charge as you ride.

Features

• Ambidextrous design 
• One-time adjustment for your phone or GPS   
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment 
• Fits devices from 2 1/8" to 3 1/2" wide
• Available in Standard or Premium model
• Premium come with USB port for on-board charging 
• Available with chrome or black perch mount
• 3 Year warranty 
• U.S.Patent No. D790,528
• Drag Specialties part number: 4402-0589 (50210) 4402-0590 (50211) 4402-0598 (50310) 4402-0599 (50311)

Fitment

• Fits: Left or right control Perch Mount with vertical bolt spacing at 1-1/16" to 1-11/16" from center to center to use included M6x1 or 1/4-20x1-3/4" bolts
• H-D: All '96-up H-D Model clutch or brake perch mounts, including Livewire (except '14-up Street 500 & Street 750) 
• Honda: All Goldwing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Goldwing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 , All VT1300 Custom Line Models (Sabre, Stateline, Interstate), Rebel 300/500
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models, XSR 700/900, SCR900
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 Including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models

Video

Instructions

Click Here For Instructions

The Ciro Cybercharger® is the evolution of our top rated phone holder. We've gone back to the drawing board to completely redesign, improve, and integrate 15 watt wireless fast charging into the holder. Compatible with all the latest smartphones, in all sizes, the Cybercharger will hold your phone securely while never leaving you without a charge!

*Also works great with our Aluminum Bar Mount Clamp in sizes 7/8" & 1" or 1-1/4"

Features

• Supports up to 15W wireless charging
• IOS and Android support
• Fast charge capable
• Waterproof electronics 
• Strong reinforced black nylon components with soft touch high-grip fingers
• Easy one-handed operations
• Securely grips almost any phone including the case 
• Adjustable from 2-3/8” wide to 4” wide
• Compatible with all Ciro ball mounts
• Rotates 360 degrees allowing portrait or landscape display
• Simple wire harness included, connects directly to any 12v battery with included in-line fuse
• Locking handle can be used on either side of holder
• Adjustable gripping force
• Adjustable bottom foot to accommodate a variety of phone heights 
• Compatible with Qi-enabled cellphone devices
• If you already have the Ciro Premium Phone holder on your bike you can reuse your Ciro wiring harness. 
• Offered in 3 configurations:
• Cybercharger only (no mounting kit) -50002
• Cybercharger with black perch mount -52311
• Cybercharger with chrome perch mount -52310
• Please confirm with your phone manufacture that your model phone has wireless charging capabilities prior to ordering
• Patent Pending
• Drag Specialties part numbers:
• 0636-0177 (50002)
• 0636-0179 (52311)
• 0636-0178 (52310)

Fitment

• For use with Ciro ball mounting system
• Connects to any 12 volt power source
• Phone holder is designed to work with a wide variety of cases, be sure to confirm that your case is compatible with wireless charging technology to utilize the charging features of this holder
• If you already have the Ciro Premium Phone holder on your bike you can reuse your Ciro wiring harness. 
• Please confirm with your phone manufacturer that your model phone has wireless charging capabilities prior to ordering

Video

Instructions

The new Ciro Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers.

With the Premium model never worry about draining your phone battery while riding again! The Ciro Smartphone Holder has a built in 1.3 amp USB plug-in (cable not included) so you’ll be able to charge as you ride.

Features

• Ambidextrous design
• Fairing mount is approx. 4" long and works with most fairing pouches
• One-time adjustment for your phone or GPS  
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment 
• Fits devices from 2 1/8" to 3 1/2" wide
• Available in Standard or Premium model
• Premium come with USB port for on-board charging 
• 3 Year warranty 
• U.S.Patent No. D790,528
• Drag Specialties part number: 4402-0595 (50216) 4402-0596 (50217) 4402-0604 (50316) 4402-0605 (50317)

Fitment

• 14-up Electra Glides, Street Glides, Tri Glides
• 96-'13 Electra Glides, Street Glides, Tri Glides. Except '07-'13 Screamin' Eagle. Will not interfere with windshield bags

Video

Instructions

Click Here For Instructions

The new Ciro Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers.

With the Premium model never worry about draining your phone battery while riding again! The Ciro Smartphone Holder has a built in 1.3 amp USB plug-in (cable not included) so you’ll be able to charge as you ride.

Features

• Ambidextrous design 
• One-time adjustment for your phone or GPS   
• Infinite adjustment with Ciro ball mount design
• Intuitive ball mounting system allows for a broad range of angle adjustment 
• Fits devices from 2 1/8" to 3 1/2" wide
• Available in Standard or Premium model
• Premium come with USB port for on-board charging 
• 3 Year warranty 
• U.S.Patent No. D790,528
• No mount included with this kit
• Drag Specialties part number:
• 4402-0573 (50000)
• 4402-0574 (50001)

Fitment

• Any Ciro ball mount.

Video

Instructions

Click Here For Instructions

The new Ciro Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers.

With the Premium model never worry about draining your phone battery while riding again! The Ciro Smartphone Holder has a built in 1.3 amp USB plug-in (cable not included) so you’ll be able to charge as you ride.

Features

• Ambidextrous design
• One-time adjustment for your phone or GPS  
• Infinite adjustment with Ciro ball mount design
• Intuitive ball mounting system allows for a broad range of angle adjustment 
• Fits devices from 2 1/8" to 3 1/2" wide
• Available in Standard or Premium model
• Premium models come with USB port for on-board charging 
• Available with chrome or black clamps
• Clamp mounts available in 7/8"-1 or 1-1/4"
• 3 Year warranty 
• U.S.Patent No. D790,528
• Drag Specialties part number: 4402-0591 (50212) 4402-0592 (50213) 4402-0593 (50214) 4402-0594 (50215) 4402-0600 (50312) 4402-0601 (50313) 4402-0602 (50314) 4402-0603 (50315)

Fitment

• Will fit round bars with 7/8", 1", or 1-1/4" diameter.   

Video

Instructions

Click Here For Instructions

The new Ciro Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers.

With the Premium model never worry about draining your phone battery while riding again! The Ciro Smartphone Holder has a built in 1.3 amp USB plug-in (cable not included) so you’ll be able to charge as you ride.

Features

• Ambidextrous design 
• One-time adjustment for your phone or GPS   
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment 
• Fits devices from 2 1/8" to 3 1/2" wide
• Available in Standard or Premium model
• Premium come with USB port for on-board charging 
• 3 Year warranty 
• U.S.Patent No. D790,528
• Drag Specialties part number: 4402-0606 (50320) 4402-0597 (50220)

Fitment

• Universal for mounting under left or right mirror stem
• H-D: Left side on all models without hydraulic clutch reservoir (excluding models with fairing mounted mirrors)

Video

Instructions

Click Here For Instructions

The Ciro accessory perch mount puts a ball on either your left or right hand controls. This can be used to mount a variety of Ciro accessories including the Ciro Smartphone Holder, the Ciro Drink/Cup Holder, or the Ciro Camera mount. Using this simple ball mount design, you may easily remove your accessory when not in use, and the mount blends right into your chrome or black controls.

Features

• Can be used on left or right side 
• Fully adjustable mounting system 
• Available in chrome or satin black to match your controls 
• 360° swivel in two directions
• 3 Year warranty 
• 4402-0575 (50110) 4402-0576 (50111)

Fitment

• Fits: Left or right control Perch Mount with vertical bolt spacing at 1-1/16" to 1-11/16" from center to center to use included M6x1 or 1/4-20x1-3/4" bolts
• H-D: All '96-up H-D Model clutch or brake perch mounts, including Livewire (except '14-up Street 500 & Street 750) 
• Honda: All Goldwing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Goldwing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 , All VT1300 Custom Line Models (Sabre, Stateline, Interstate), Rebel 300/500
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models, XSR 700/900, SCR900
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 Including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models

Video

Instructions

Click Here For Instructions 

Attaches behind the speaker mount between the speaker pod and the Tour-Pak. Used to attach any Ciro accessory holder.

Features

• No drilling required 
• Works with all Ciro ball mount accessories
• Only works with King size Tour-Pak with backrest and speaker pods
• 3 Year warranty
• Fits 2014-up Harley-Davidson models equipped with tour-pak and speaker pods
• Drag Specialties part number:
• 0636-0138 (50121)
• 0636-0139 (50122)

Fitment

Tour Pak must be equipped with speaker pods in order to install Ciro Passenger Mount

• '14-up Harley-Davidson Touring Models including:
• Road Glide Ultra FLTRU
• Screamin' Eagle CVO Road Glide Ultra FLTRUSE
• Electra Glide Ultra Classic FLHTCU
• Electra Glide Ultra Classic Low FLHTCUL
• Electra Glide Ultra Limited FLHTK
• Electra Glide Ultra Limited Low FLHTKL
• Screamin' Eagle CVO Limited FLHTKSE
• Tri Glide Ultra Classic FLHTCUTG 
• ‘98-'13 Harley-Davidson Touring Models including:
• Tri Glide Ultra Classic FLHTCUTG
• Ultra Classic Electra Glide ‘98-'13 FLHTCU/I
• ‘10-'13 Electra Glide Ultra Limited FLHTK
• '11-'13 Road Glide Ultra FLTRU
• ‘08-'13 Screamin' Eagle CVO Ultra Classic Electra Glide FLHTCUSE
• '11 Screamin' Eagle CVO Road Glide Ultra FLTRUSE
• '09-'13 Tri Glide Ultra Classic FLHTCUTG
• '98-'13 FLHTC Electra Glide Classic if accessory rear speaker was added

Instructions

Click Here For Instructions

The Ciro® mirror mount offers an innovative way to mount your Ciro accessories. It is especially useful for bikes that are incompatible with perch mounting, or bikes with cluttered handlebars. The mirror mount keeps your device, drink, or GPS/camera close to the controls for ultimate convenience.  

Features

• A great solution for mounting Ciro accessories on metric or Harley motorcycles 
• Can be used as an alternative for bikes that are incompatible with perch mounting
• 3 Year warranty 
• Patent pending
• Drag Specialties part number: 4402-0584

Fitment

• Universal for mounting under left or right mirror stem
• H-D: Left side on all models without hydraulic clutch reservoir (excluding models with fairing mounted mirrors)
• Honda: Left or right side on all models (excluding Goldwing GL1800 and F6B) 
• Victory: Left or right side on all models excluding Vision 
• Indian: All '14-up Models on clutch side only 
• Kawasaki: Left or right side on 1700 Vulcan, Voyager, Vaquero, Vulcan 900 & 2000 models. Left side only on all other models 
• Suzuki: Left side on all models 
• Yamaha: Left or right side on Venture, Roadliner, Stratoliner and Raider. Left side on all models excluding Royal Star

Instructions

Click Here For Instructions

The Ciro® Fairing mount keeps your device, drink, or camera front and center. This mount works great with any Ciro ball mount accessories and really helps keep your eyes on the road.

Features

• Very strong forged aluminum with durable powder coating
• Handy for use with mobile based GPS
• Can be used to mount Ciro device holders, cup/drink holders, cameras, and more
• Approx. 4" long and works with most fairing pouches
• 3 Year warranty
• Patent pending
• Drag Specialties part numbers:
• 4402-0581 (50116)
• 4402-0582 (50117)

Fitment

• 14-up Harley-Davidson Touring models including:
• Ultra Classic FLHTCU
• Ultra Limited FLHTK
• Street Glide FLHX 
• Road King FLHR
• Electra Glide FLHT
• Tri-Glide FLHTCUTG
• '96-'13 Electra Glides, Street Glides, Tri-Glides. Except '07-'13 Screamin' Eagle.

Video

Instructions

Click Here For Instructions

Clean, single bolt attachment clamp made of heat treated aluminum. Compatible with Ciro accessories, including phone holders, drink holders and camera mounts. Available in chrome plated or black finish and in 7/8"-1" kit or 1-1/4" kit. 

*50130 & 50131 replaces previous 50114 & 50115 plastic bar mounts

Features

• Ciro patented clamp design eliminates ugly pins and hinges used in traditional clamps
• Can be used to mount Ciro device holders, cup/drink holders, cameras, and more
• Made from strong aluminum
• Available in:
• Black or chrome
• 7/8"-1" kit or 1-1/4" kit
• 3 Year warranty 
• Drag Specialties part numbers:
• 0636-0160 (50128)
• 0636-0161 (50129)
• 0636-0162 (50130)
• 0636-0163 (50131)

Fitment

7/8" and 1" round bars or 1-1/4" round bars

Ciro® patent pending clamp design eliminates ugly pins and hinges used in traditional clamps. Works with Ciro device holders, cup/drink holders, cameras and can be mounted to any 7/8" or 1" round bar.

Features

• Ciro patented clamp design eliminates ugly pins and hinges used in traditional clamps
• Can be used to mount Ciro device holders, cup/drink holders, cameras, and more
• Made from a strong ABS composite with brass threaded inserts
• Available in black or chrome
• 3 Year warranty 
• U.S. Design Patent No. D832,694
• Drag Specialties part numbers:
• 4402-0577 (50112)
• 4402-0578 (50113)

Fitment

• 7/8" and 1" round bars.

Video

Instructions

Click Here For Instructions

Replacement power cord for all Ciro powered phone holders and Cycbercharger. 

Works with kits: 50000, 50210, 50211, 50212, 50213, 50214, 50215, 50216, 50217, 50220, 50002, 52311 and 52310.

Cord length is 79" from the fuse holder to the end plug.