Ciro

Add visibility and style to your 2014-up H-D Touring model with the new all red, LED Filler Panel Lights from Ciro. These lights have been designed to complement the OE styling of your bike while creating a custom look with their brilliant chrome or gloss black painted housings. Using high quality Everlight® automotive grade certified LEDs, paired with a specially designed wide view angle lens, these run, turn, brake lights are sure to draw attention. A plug-n-play harness is included in the kit for a quick and easy installation with no modification to your bike.

Features

• Dramatically increase rear visibility
• Smooth out the back of your bike to create a finished custom look
• Red run, turn and brake signal
• Everlight® automotive grade certified LEDs
• Clear smoked or red lenses
• Easy plug-n-play installation (no can-bus controller needed)
• Patent pending
• Drag Specialties part numbers:
• 2040-2681 (40043)
• 2040-2682 (40044)
• 2040-2667 (40045)
• 2040-2668 (40046)

Fitment

'14-up Street Glide FLHX/FLHXS
'20-up Road Glide FLTRX
'15-up Road Glide FLTRX/FLTRXS
'17-up Road King Special FLHRXS

The follow models will need an additional Plug-N-Play installation kit
'06-'09 Street Glide FLHX,  install kit P/N 40090
'10-'13 Street Glide FLHX,  install kit P/N 40091
'10-'13 Road Glide Special FLTRX,  install kit P/N 40091

Instructions

Click Here for Instructions

The follow models will need an additional Plug-N-Play installation kit to complete the installation of kits 40043, 40044, 40045 and 40046
'06-'09 Street Glide FLHX,  install kit P/N 40090
'10-'13 Street Glide FLHX,  install kit P/N 40091
'10-'13 Road Glide Special FLTRX,  install kit P/N 40091

FAQ

• Q: How should I clean / prep the painted surface prior to installing the Filler Panel Lights?
• A: All waxes, dirt and road grime needs to be removed with warm soap and water. Once the area is cleaned and dried wipe the area down with denatured alcohol (available at your local hardware store).  

Add visibility and style to your 2009-up H-D Touring model with the new all red, LED Filler Panel Lights from Ciro. These lights have been designed to complement the OE styling of your bike while creating a custom look with their brilliant chrome or gloss black painted housings. Using high quality Everlight® automotive grade certified LEDs, paired with a specially designed wide view angle lens, these run, turn, brake lights are sure to draw attention. A plug-n-play harness is included in the kit for a quick and easy installation with no modification to your bike.

Features

• Dramatically increase rear visibility
• Smooth out the back of your bike to create a finished custom look
• Red run, red brake and red turn signal
• Everlight® automotive grade certified LEDs
• Available with red or clear lens
• Available with chrome or black body
• Easy plug-n-play installation (no can-bus controller needed)
• All '09-'13 kits will include RickRak custom filler panel brackets
• U.S. Patent No. D795,474
• Drag Specialties part numbers:
• 2040-2669 (40047)
• 2040-2670 (40048)
• 2040-2676 (40049)
• 2040-2675 (40050)

Fitment

• '14-up Harley-Davidson Touring models including:
• Electra Glide Ultra Classic FLHTCU/L
• Electra Glide Ultra Classic Low FLHTCUL
• Road Glide Ultra FLTRU
• Ultra Limited FLHTK
• Ultra Limited Low FLHTKL 
• Road King FLHR
• Electra Glide Standard FLHS ('19-UP)
• On CVO Ultra models the stock saddlebag filler strips need to be removed.
• '09-'13 Harley-Davidson Touring models include:
• Road King, FLHR
• Road King Classic, FLHRCI
• Electra Glide Classic, FLHTC
• Electra Glide Ultra Classic, FLHTCU
• Electra Glide Ultra Limited, FLHTK
• Road Glide Ultra, FLTRU
  
• All '09-'13 Kits will include RickRak custom filler panel bracket
  
  

Instructions

Click Here for Instructions

The Ciro High Caliber Flexible Antenna is the perfect accessory to replace that long ugly whip antenna. The sleek bullet styling looks great with any bike and the rubber molded flexible base saves you from bends or breaks.

Features

Fitment

'89-up Harley-Davidson Electra Glide, Street Glide, Road Glide, Tour Glide & '09-up Tri Glide. For AM/FM/WB applications only.

Video

Instructions

Click Here for Instructions

The Ciro® Toe Rest is a great addition to your Harley, Indian, or any motorcycle with 1-1/4" engine guards. These elegant toe rests mount directly to the engine guard allowing you to keep your heel on the floorboard with a secure place for your toe on the engine guard. This is a comfortable and popular riding position because it allows you to stretch out while also keeping your feet close to the controls.

Features

• Easy installation
• Mounts to any 1-1/4" Round engine guard
• Protrudes out past the engine guard creating a wide point
• Designed with a smooth curved outside profile
• Rubber portion is designed with a raised end to provide secure footing
• Unique open design provides an ancillary tie down point
• Available in black or chrome
• Drag Specialties part numbers:
  1620-2218 (60400)
  1620-2219 (60420)

Fitment

• MULTI-FIT 1-1/4" Round engine guards
• Will not work on Harley models with hard lower fairings
• Will work on Indian Motorcycles with and without fairing lowers

Video

Instructions

Click Here for Instructions

The Ciro Cybercharger® is the evolution of our top rated phone holder. We've gone back to the drawing board to completely redesign, improve, and integrate 15 watt wireless fast charging into the holder. Compatible with all the latest smartphones, in all sizes, the Cybercharger will hold your phone securely while never leaving you without a charge!

*Also works great with our Aluminum Bar Mount Clamp in sizes 7/8" & 1" or 1-1/4"

Features

• Supports up to 15W wireless charging
• IOS and Android support
• Fast charge capable
• Waterproof electronics 
• Strong reinforced black nylon components with soft touch high-grip fingers
• Easy one-handed operations
• Securely grips almost any phone including the case 
• Adjustable from 2-3/8” wide to 4” wide
• Compatible with all Ciro ball mounts
• Rotates 360 degrees allowing portrait or landscape display
• Simple wire harness included, connects directly to any 12v battery with included in-line fuse
• Locking handle can be used on either side of holder
• Adjustable gripping force
• Adjustable bottom foot to accommodate a variety of phone heights 
• Compatible with Qi-enabled cellphone devices
• If you already have the Ciro Premium Phone holder on your bike you can reuse your Ciro wiring harness. 
• Offered in 3 configurations:
• Cybercharger only (no mounting kit) -50002
• Cybercharger with black perch mount -52311
• Cybercharger with chrome perch mount -52310
• Please confirm with your phone manufacture that your model phone has wireless charging capabilities prior to ordering
• Patent Pending
• Drag Specialties part numbers:
• 0636-0177 (50002)
• 0636-0179 (52311)
• 0636-0178 (52310)

Fitment

• For use with Ciro ball mounting system
• Connects to any 12 volt power source
• Phone holder is designed to work with a wide variety of cases, be sure to confirm that your case is compatible with wireless charging technology to utilize the charging features of this holder
• If you already have the Ciro Premium Phone holder on your bike you can reuse your Ciro wiring harness. 
• Please confirm with your phone manufacturer that your model phone has wireless charging capabilities prior to ordering

Video

Instructions

Click Here for Instructions

FAQ

Q: Will the ball mount work with our brand ball mount accessories?

A:  All Ciro ball mount accessories used our compact 5/8" ball mounting system. You will need to confirm the ball size with the brand of mount your using.