Fang White Halo Front Signal Light Inserts with Chrome or Black Bezel
The Fang Front Signal Light Inserts are a great way to add modern styling and class to your bike while also increasing visibility. We've engineered the lens to amplify light output for maximum brightness as well as DOT compliance. The result is an eye-catching white LED halo driving light and super bright amber turn signal.
DOT approved high intensity amber turn signal for improved visibility
The visor has a unique modern design for great style that complements any motorcycle
Optical grade polycarbonate lens has scientifically engineered optics for maximum light transfer and increased visibility
High intensity white running light provides a distinctive halo affect for increased visibility and style
Amber LED turn signal
Available black or chrome bezel
Fits 2000 and newer H-D models with bullet turn signals
Everything you need for a plug-and-play install on '14-up H-D models
Some models prior to 2013 may require require a load equalizer to correct turn signal timing
Drag Specialties part number: 2040-2017 (45400) 2040-2019 (45420)
IMPORTANT NOTE FOR OUTSIDE THE USA:
Harley-Davidson models sold outside the United States sometimes have single circuit sockets. The Fang Turn Signal Inserts require a dual circuit socket to function. Please contact us before your order if you need assistance determining which socket you have.
Touring & Trike:
'14-up Harley-Davidson Touring motorcycles do not require a load equalizer.
'02-'13 Harley-Davidson Touring motorcycles may require a load equalizer to correct turn signal timing.
'04-'05 Screamin’ Eagle Electra Glide FLHTCSE
'06-'13 CVO Ultra Classic FLHTCUSE
'14-up Electra Glide Ultra Classic FLHTCU
'14-up Electra Glide Ultra Limited FLHTK
'14-'15 CVO Limited FLHTKSE
'04-'09 Road Glide FLTR/I
'10-'13 Road Glide Custom FLTRX
'15-up Road Glide, Road Glide Special FLTRX, FLTRXS
'11-'13 Road Glide Ultra FLTRU
'09 CVO Road Glide FLTRSE
'11, '15 CVO Road Glide Ultra FLTRUSE
'12-'13 CVO Road Glide Custom FLTRXSE
'04-'07 Road King Custom FLHRS/I
’17-up Road King Special FLHRXS
'02-'03 Screamin’ Eagle Road King FLHRSEI
'07-'08 & '13-'14 CVO Road King FLHRSE
'06-up Street Glide FLHX/I
'14-up Street Glide, Street Glide Special FLHX, FLHXS
'10-'12, '15 CVO Street Glide FLHXSE
'09-up Tri Glide Ultra Classic FLHTCUTG
'15-up Road Glide FLRT
'10-'11 Street Glide Trike FLHXXX
2020-up Electra Glide Standard FLHT
'11-up Harley-Davidson Softail motorcycles do not require a load equalizer.
'00-'10 Harley-Davidson Softail motorcycles may require a load equalizer to correct turn signal timing.
'12-'17 Softail Slim FLS
'16-'17 Softail Slim S FLSS
'05-'06 Screamin’ Eagle Fat Boy FLSTFSE
'06 Heritage Softail FLST/I
'05-'07 Softail Springer Classic FLSTSC/I
'02-'03 Springer Softail FLSTS/I
'10-'12 CVO Softail Convertible FLSTSE
'05-'17 Softail Deluxe FLSTN
'14-'15 CVO Softail Deluxe FLSTNSE
'08-'11 Cross Bones FLSTSB
'02-'17 Fat Boy FLSTF/I
'10-'16 Fat Boy Low FLSTFB
'16-'17 Fat Boy S FLSTFS/BS
'00-'07 Softail Deuce FXSTD/I
'03-'04 Screamin’ Eagle Softail Deuce FXSTDSE
'02-'08 Softail Standard FXST/I
'02-'09 Night Train FXSTB/I
'02-'06 Springer Softail FXSTS/I
'07-'10 Softail Custom FXSTC
'07-'09 CVO Softail Springer FXSTSSE
'08-'11 Rocker FXCW/C
'11-'13 Blackline FXS
'13-'17 Breakout FXSB
'13-'14 CVO Breakout FXSBSE (except '16-'17 FXSE)
2018 Softail - Milwaukee Eight:
’18-up Sport Glide FLSB
’18-up Low Rider FXLR
’18-up Slim FLSL
’18-up Street Bob FXBB
’18-up Fat Bob FXFB/S
’18-up Fat Boy FLFB/S
’18-up Breakout FXBR/S
’18-up Heritage Classic FLHC/S
'12-up Harley-Davidson Dyna motorcycles do not require a load equalizer
'01-'11 Harley-Davidson Dyna motorcycles may require a load equalizer to correct turn signal timing
'01 Super Glide T-Sport FXDX/T
'02-'17 Dyna Models
'14-up Harley-Davidson Sportster motorcycles do not require a load equalizer
'02-'13 Harley-Davidson Sportster motorcycles may require a load equalizer to correct turn signal timing
All '02-up XL Models
If your motorcycle requires a load equalizer we recommend:
-Namz/Badlands, Load Equalizers
IMPORTANT NOTE FOR OUTSIDE THE USA:
Harley-Davidsons sold outside the United States sometimes have single circuit sockets. The Fang® Turn Signal Inserts require a dual circuit socket to function.Please contact us before your order if you need assistance determining which socket you have.
Q: Will the Ciro Fang rear signal lights work with light strobe kits?
A: No. Sorry due to how the electronics process the signals they start to work against each other.
Q: Once I installed the your Fang LED turn signals my turn signal now are flashing faster than before, is this normal?
Yes. Once you change your lights from incandescent lights to LED you have changed the electrical load on that circuit and the BSM, TSM or TSSM thinks you have a light bulb out. Some models you can perform aturn signal syncand other models will require a load equalizer.
Ciro Windshield Trim With or Without LED Lights in Chrome or Black
Pierce the night with the Ciro LED Lighted Horizon Windshield Trim. Clean and classy styling flows with the lines of your vented batwing fairing to enhance the look of the front of your motorcycle. Hidden LEDs illuminate the bottom edge with a bright white running light and amber sequential turn signals to increase visibility.
Bright white running light, amber sequential turn signals
Plug-n-play installation with no drilling
LEDs are hidden when bike is off for an ultra clean look
Eliminates factory gap between fairing and windshield
Q: I installed the Lighted Windshield Trim and the lights are not working correctly, they are dim or flickering, did I get a bad part?
A: No. This will happens when the lights are plugged into the incorrect connectors that are located under the radio. The correct connectors are located under the light bar on the side of the forks. Refer to step 3 on the instructions for more information.
Ciro Can-Bus Controller
The Ciro proprietary can-bus controller is used for Ciro lighting products (with red and amber LEDs) on 2014-up Harley-Davidson Touring models. This controller is necessary if you have not installed any Ciro lights on your bike previously and plan to install any of the following: Ciro Snakeyes, Ciro Tour Blade®, Ciro Bag Blades. The parts listed above are sold in a kit option with the Ciro proprietary can-bus controller, but if you did not originally purchase the necessary kit for your bike, this is what you'll need!
Easy plug-and-play installation
Designed and engineered to work with the Can-bus electrical system on 2014-up Harley-Davidson touring models.
Will not trip engine trouble codes.
Allows for greater visibility by creating an amber turn signal circuit to be used in Ciro's Bag Blades, Tour Blade, Snakeyes and Filler Panel Lights
Make your fairing pop with the Ciro Bat Blades®! These innovative strips feature ultra bright white LEDs to work as daytime running lights and also amber turn signals on each side to be sure you are seen.
Easy installation with included wiring adapter plugs into OEM harness
Requires no drilling, cutting, or splicing
Low profile black circuit board blends in seamlessly when the bike is off
White lights fade when turn is on so the amber really stands out
Tour Blade® LED Lights for Harley-Davidson Tour-Pak
The Ciro Tour Blade® LED light is the cleanest way to add more light to the back of your bike. The low profile light strip fits between your backrest and tour pack to blend right into the motorcycle, while at the same time adding bright sequential turn signals, running lights, and center brake light.
Controller is needed if you are not running any other Ciro products that are using the 40019 controller.
Note: Ciro's can-bus friendly lighting controller works with Bag Blades®, Tour Blade®, Snakeyes and Filler Panel Lights for 2014-up bikes. Only one controller is needed to run all four products. If you do not have the Ciro controller already, purchase Tour Blade® with controller. If you have any questions please email us or give us a call at 715-808-0027.
Low profile light strip is hidden under your backrest for a super clean look
Installation is easy and requires no cutting, drilling, or wire tapping, with the Ciro plug-and-play lighting controller
Features run, sequential turn, and center brake light
Amber turn signal really draws drivers’ eyes to be sure you’re seen
Q: If I have one of the Ciro light kits on my bike that came with a controller, do I need the another controller for this kit?
A: No. Ifhave already have a Ciro controller on your bike you will not need another one.
Snakeyes LED Lights for Harley-Davidson Tour-Pak in Black or Chrome
Smooth the transition between back rest and Tour-Pak with the Ciro Snakeyes. This set includes custom light housing featuring bright red run and brake lights as well as an amber turn signal to really stand out. This kit uses the proprietary Ciro lighting controller to make for an easy plug and play installation.
Note: Ciro's can-bus friendly lighting controller works with Bag Blades, Tour Blade, Snakeyes and Filler Panel Lights for 2014-up bikes. Only one controller is needed to run all four products. If you do not have the Ciro controller already, purchase the Snakeyes with controller. If you have any questions please email us or give us a call at 715-808-0027.
Plug and play installation
Increases visibility from the rear
Adds styling to your Tour-Pak
Run, turn, and brake function
Available in chrome or black
Available with or without the Ciro controller
Easily removable light housings makes painting to color match easy