Spacer Kit for Frame Mounted Adjustable Highway Peg Mounts

Fits the following kits: 60100, 60120, 60600, 60620, 60101, 60121, 60601, 60621, 60102, 60122, 60602, 60622 In conjunction with the models listed below.

Electra Glide models:

• 2014 CVO Ultra Limited Electra Glide
• '09-'13 CVO Ultra Classic Electra Glide
• ‘09-'19 Electra Glide Ultra Classic   
• ‘10-'24 Ultra Limited 
• ‘16-'18 CVO Ultra Limited
• ‘20-'21 CVO Limited
• ‘09-up Street Glide      
• ‘14-'23 Street Glide Special  
• '10-'12 CVO Street Glide
• '10 & ‘19-'22 Standard
• '09 Electra Glide
• '09-'13 Electra Glide Classic
• ‘22-'23 Street Glide ST
• 2021 Revival
• '15-'23 CVO Street Glide
• '23-up CVO Street Glide

Road Glide models:

• '15-'16 CVO Road Glide Ultra
• '09 & '15-up Road Glide
• '15-'23 Road Glide Special
• '10-'13 & '16-'24 Road Glide Ultra
• '18-'22 CVO Road Glide
• '09 CVO Road Glide
• '12-'13 CVO Road Glide Custom
• '10-'13 Road Glide Custom
• '20-'24 Road Glide Limited
• 2023 Road Glide Special Anniversary
• 2023 CVO Road Glide Limited Anv
• '23-up CVO Road Glide
• '22-'23 Road Glide ST

Road King models:

• ‘17-'25 Road King Special
• '13-'14 CVO Road King
• ‘09-'22 Road King    
• ‘09-'19 Road King Classic  

Tri Glide models:

• ‘09-25 Tri Glide Ultra
• ‘15-25 Freewheeler
• '23-25 Road Glide 3

Not compatible with the 2025+ Street Glide Ultra, 2023.5+ models equipped with H-D Fairing Lowers (P/N 57400504xxx), or models with H-D Switchback Mini Floorboards (P/N 50502668 or 50502669).

'24-up CVO Road Glide ST or models with factory mini driver floorboards will need to convert to full-size floorboards to install the Frame Mounted Adjustable Highway Peg Kits.

Installation Notes:

Not Compatible with H-D Defiance Rider Floorboards (P/N 50500640)

The Harley-Davidson Empire Rider Footboards (P/N 50501932 & 50501933) will have limited arm adjustments toward the rider.

Models with aftermarket headers or floorboard spacers:

If you have an aftermarket exhaust, check the right-side floorboard mounts for spacers. Some aftermarket exhausts require floorboard spacers, and if spacers are already installed, you will need an additional one to mount the Ciro Frame Mounted Highway Pegs. A longer bolt (3/8-16) may also be required, which can be sourced from most hardware stores or your exhaust manufacturer.

The extra spacer is necessary because the Ciro design utilizes an additional bolt compared to the stock front floorboard mount.

Not Compatible with Tall Boys Cycles floorboard extension mounts.

For any questions, feel free to contact Ciro at 715-808-0027.

Q: Will the frame mounted highway peg mount work with aftermarket floorboard spacers?

• A: No. Our kit is designed to replace the factory front mounting bracket that is bolted directly to the frame mount.  Please contact our tech department for more details.

Q: Will the frame mounted highway pegs work with my H-D Defiance Floorboards (P/N 50500640)

• A: Yes. We have found that most of the Defiance Floorboards will bolt on without any issues. Some of the floorboards have to be filed down just a little where the floorboard and our mounting bracket meet to get them to lay flat. 

Q: What are the lengths of the standard and extended highway pegs?

• A: Standard arm is 4.0", extended arm is 5.5"

Q: I'm X'X" tall, should I get standard or extended length?

• A: The Extended Highway Pegs are the best for riders who have a 33"or more inseam.

Q. I have an aftermarket exhaust that needed floorboard spacers to make it fit. Will the spacers affect the fitment of these?

• A. Yes. Some aftermarket exhausts use floorboard spacers. If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount. Please feel free to contact Ciro if you have any questions 715-808-0027.

Q: Why won't the Frame Mounted Highway Peg Mounts work with the 2024 CVO Road Glide or with the H-D Switchback Mini Floorboards?

• A: The front floorboard mounting bracket that is used with the 2024 CVO Road Glide or with the H-D Switchback Mini Floorboards is set back too far to allow our front mounting bracket to work. To install on this model you will need full size floorboards.