Headlight Installation Kits / Wiring Adapters by Vision X
Headlight Installation Kits / Wiring Adapters by Vision X
Headlight Installation Kits / Wiring Adapters by Vision X
Headlight Installation Kits / Wiring Adapters by Vision X

Headlight Installation Kits / Wiring Adapters by Vision X

45010

Regular price $21.00
/
Shipping calculated at checkout.
59 in stock

One or more of these XMC accessories may be needed to install the Vision X headlights.

  • 45010: Vision X LED H4 to Delphi 4 pin headlight connector.
  •  Click here for full fitment guide 
    • 2014-up Harley-Davidson models
      • Electra Glide
      • Street Glide
      • Street Glide Special
      • Ultra Limited*
      • Ultra Classic*
      • Electra Glide Standard
      • Tri Glide Ultra models*
    • On the above models equipped with factory dual beam headlights follow the headlight Y wire harness back to the Delphi flat 4 pin connector and remove the harness Y harness to install this harness. 
    • *Models equipped with Factory Daymaker LED Headlight will also need the 45012 to have the low beam on while the high beam is on.  


________________________________________________________

  • 45011: Vision X LED H4 / H11 to H9 Y-Adapter
Factory Dual Beam headlight
________________________________________________________
  • 45012: Dual Beam headlight wiring adapter. “High Four” All On Adapter is designed to accompany the Vision X headlight. The 45012 allows the high and low beams to shine at the same time.
  • Click here for full fitment guide 
    • All models prior 2014 need the 45012 to have both high and low beam on when high beam switch is on. 
    • Not needed on 2014-up Touring models with factory equipped standard Dual Beam Halogen headlight. 
    • 2014-up Ultra models equipped with factory LED Daymaker headlight the 45012 will be needed to have the dual beam option.
    • Will not fit in most Factory Harley-Davidson 5-3/4" headlight buckets. 

_______________________________________________________________

   Factory H4 Halogen Light 68342-05A


Factory LED Daymaker Headlight  67700249 or 67700066

Factory Dual Beam Headlight 67700065

 

________________________________________________________

    • 45007: Required when installing 7” Vision X headlight (P/N 45000 or 45001) into 2014-up Indian® Chieftain® or Roadmaster® models.
    Instructions

    Click here for XMC installation instructions 

    Click here for full fitment guide 

    Customer Reviews

    Based on 30 reviews
    90%
    (27)
    7%
    (2)
    3%
    (1)
    0%
    (0)
    0%
    (0)
    D
    D. Stevens
    Wiring Adapter

    I have a 2022 Harley Ultra Ltd.
    I installed the 7" Ciro LED headlight. I ordered the wiring adapter to properly fit the headlight to my bike. I must say, this adapter is brilliant. The adapter already had a female plug installed for the white wire from my bike to light the halo ring, so no cutting or splicing or anything.
    Ciro made this headlight install very simple. Could not be more pleased! Excellent job Ciro!

    R
    Ron Connelly

    Replaced my original Dyna headlight with the Vision X. Light worlds ahead of the OEM! I would recommend this upgrade to anyone. It is a gamechanger and one of the best additions on my Harley!

    E
    Everett Kelley
    Plug and play?

    Very good stuff but needs an extra wire for the Halo. That's what it's supposed to and high quality equipment but needs that other wire other doctors have it further models..

    P
    Phillip Crenshaw
    Excellent gear.

    Right price, excellent gear. Much better than the OEM. I have quite a few Ciro products on my bike and they are all great, work well, and are priced right! Thanks to Ciro.

    G
    Glen Anderson
    wiring adapter

    The XMC 7 " LED Headlight is great and the wiring adapter had a problem with the plugs staying together tight so i used zip ties to fasion them together .